All About Assessment Validation and How to Validate Assessments

All About Assessment Validation and How to Validate Assessments

Blog Article

With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.

Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.

Validation involves checking which aspects of an RTO's assessment process are accurate and identifying areas for improvement. With a solid understanding of its components, validation is less intimidating.

The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.

The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.

This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.

Defining the Two Types of Assessment Validation

Assessment Validation Explained

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, relates to the first part of the clause, emphasizing the need to meet all unit requirements and ensuring all workbooks are 100% compliant.

Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

Our focus in this article will be on assessment tool validation.

Methods for Conducting Assessment Tool Validation

With a clear understanding of the two types of validation, let’s focus on assessment tool validation.

Optimal Timing for Assessment Tool Validation

Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:

- resources are updated
- when new training products are added on scope
- reviewing your course against training product updates
- your risk assessment includes identifying your learning resources as a risk

The risk-based regulatory approach of ASQA requires RTOs to perform regular risk assessments. Student complaints about learning resources indicate it's time for assessment tool validation.

How to Choose Training Products for Validation

Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.

What Do You Need for Assessment Tool Validation?

Training Materials

Given that you are conducting assessment tool validation, you will need the full array of your learning resources:

Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.

Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.

Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Panel of Validators

Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.

In total, your validation panel must have:

Vocational competencies and current industry skills that relate to the unit being validated

Up-to-date knowledge and skills in vocational teaching and learning

One of these training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its future version

Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.

Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Examine?

As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.

Key Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment website give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Key Rules of Evidence

Validity – Is the evidence showing that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work belongs to the candidate?

Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?

Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Be Consistent with Your Teachings

Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

change diapers

bottle preparation, bottle-feeding babies, and cleaning equipment

solid food prep and feeding babies

respond to infant signs and cues appropriately

prepare and settle infants for sleep

monitor and promote age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months doesn’t fulfill the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

All or Not Competent

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Give More Specificity

Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What sort of information can be included in a work package?

Answers might include:

Required resources

Relevant costs

Length of activities

Designated roles and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.

Answers may include, but are not necessarily limited to:

Weather conditions – isolating the work area, engineering controls, PPE

Work area and ground conditions – eliminating hazards, isolating, engineering

People – isolating, engineering, administration

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolating, engineering controls, administration

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.